Cisco Cisco Aironet 350 Wireless LAN Client Adapter

This section describes how to upgrade to firmware release 4.13.

To determine the firmware version that your client adapter is currently using, follow the instructions 
below for your operating system.

Select Status from the Commands pull-down menu in ACU. The firmware version is displayed in the 
Status screen.

Select Start > Programs > Cisco > Load New Firmware. The firmware version is displayed in the 
Select New Firmware screen.

Select Status from the Commands pull-down menu in ACU. The firmware version is displayed in the 
Status screen.

Select Status from the File pull-down menu in the Macintosh client utility and then the Link Status tab. 
The firmware version is displayed in the Status screen.

For instructions on upgrading your current version of Cisco Aironet client adapter firmware, follow the 
steps below:

Go to www.cisco.com and select Technical Documents > Documentation Home Page > 
Broadband/Wireless Solutions > Aironet 350 Series Wireless LAN Products > Cisco Aironet 350 
Series Wireless LAN Adapters > Cisco Aironet Wireless LAN Adapters Software Configuration 
Guide.

Select one of the following links, depending on your operating system:

For Windows 95, 98, NT, 2000, or Me or Linux, select Using the Aironet Client Utility.

For Windows CE, select Using the Client Utilities for Windows CE.

For Macintosh, select Using the Client Utility for MacOS 9.x.

Follow the instructions for loading new firmware.