Cisco Cisco Aironet 350 Wireless LAN Client Adapter
5
Release Notes for Cisco Aironet Client Adapter Firmware, Version 4.25.23
OL-2019-02
Upgrading to a New Firmware Release
Linux
Step 1
Select Load New Firmware from the Commands drop-down menu.
Step 2
In the File Selection window, find the location of the new firmware in the Files box.
Step 3
Under Files, click the new firmware image (PC3x0vxxxxx.img) so it appears in the Selection box at the
bottom of the window.
bottom of the window.
Step 4
Click OK to load the firmware image into your client adapter’s Flash memory.
Upgrade Procedure for Windows CE
Step 1
Use a serial or USB cable to connect your Windows CE device to a laptop or PC running ActiveSync. A
message appears on the Windows CE device indicating that it is connecting to the host. After the
Windows CE device is connected, the New Partnership window appears on the laptop or PC. This
window asks if you want to set up a partnership.
message appears on the Windows CE device indicating that it is connecting to the host. After the
Windows CE device is connected, the New Partnership window appears on the laptop or PC. This
window asks if you want to set up a partnership.
Step 2
Perform one of the following:
•
If you want to establish a partnership that allows you to synchronize files between the laptop or PC
and the Windows CE device, select Yes, click Next, and follow the instructions on the screen to
specify the files to be synchronized and to finish setting up the partnership.
and the Windows CE device, select Yes, click Next, and follow the instructions on the screen to
specify the files to be synchronized and to finish setting up the partnership.
•
If you do not want to synchronize files and want to connect as a “guest,” select No and click Next.
The screen indicates that you are connected as a guest.
The screen indicates that you are connected as a guest.
Step 3
Use the laptop or PC’s web browser to access the following URL:
http://www.cisco.com/public/sw-center/sw-wireless.shtml
Step 4
Under Wireless Software Products, select Cisco Aironet 340 Series or Cisco Aironet 350 Series.
Step 5
Click the filename of the appropriate radio firmware image for your client adapter (for example,
PC350v42523.exe).
PC350v42523.exe).
Note
If your wireless network uses LEAP, remember to select a radio firmware image of the same
draft standard as the access points to which your client adapters will be authenticating.
draft standard as the access points to which your client adapters will be authenticating.
Step 6
Read and accept the terms and conditions of the Software License Agreement.
Step 7
Select the firmware file to download it.
Step 8
Save the file to a floppy disk or to your laptop or PC hard drive.
Step 9
Open Windows Explorer, locate the file on your floppy disk or hard drive, double-click it, and extract
the image file to a folder.
the image file to a folder.
Step 10
In the ActiveSync window on the laptop or PC, click the Explore button to view the files on the Windows
CE device.
CE device.