Cisco Cisco Aironet 350 Wireless LAN Client Adapter Guia De Informação

Página de 13
In the Select Network Service window, click Have Disk....
10. 
Click OK.
11. 
In the Install From Disk window, click Browse....
12. 
In the Locate File window, browse to the C:WindowsInf folder (this is a hidden
folder).
13. 
Click to select NETWZC.INF.
14. 
Click Open.
15. 
In the Install From Disk window, click OK.
16. 
In the Select Network Service window, in the Network Service box, click to select
Wireless Zero Configuration.
17. 
Click OK. At this point, you need to reboot your PC. With that completed, you
should find that the WZC service has been successfully installed on your system, and
you should now have access to the Windows Network tab.
Note: If you do not see the Wireless Network tab when you go back into the Network
Properties page, then the problem might be that the service did not start.
Complete these steps in order to start the service:
Open Administrative Tools in the Control Panel and select Services.
a. 
Scroll down to Wireless Zero Configuration, right−click on it and select
Start. The service is now enabled. If the USB adapter had been successfully
configured, then the Wireless Network tab will be visible under Network
Properties. New notebooks that are equipped with wireless network adapters
from the manufacturer usually have WZC pre−installed. In order to make use
of the WZC service, you must use a compatible wireless network adapter,
such as a Cisco adapter. The wireless network adapter scans for available
wireless networks and passes the network names (also known as Service Set
Identifiers or SSIDs) to the WZC service. The Wireless Zero − Auto
configuration from Microsoft explains how to configure the WZC service.
Note: However, make sure that you do not run a third party wireless client
utility, such as Cisco's Aironet Desktop Utility (ADU), as well as WZC
service simultaneously on your computer. This can lead to an inconsistent
client connectivity issue. In such cases, you can disable the WZC service on
your computer.
Complete these steps in order to disable WZC on your computer:
b. 
Click Start, then click Control Panel.
a. 
Click Performance and Maintenance, click Administrative Tools, and
then click Services.
b. 
Double−click the Wireless Zero Configuration service.
c. 
On the General tab, click Stop.
d. 
In the Startup type list, click Disabled, then click OK. The WZC is now
disabled and does not reload when you restart your computer.
e. 
18. 
Capabilities
Q. Can I run two computers together without an access point?
A. From the Aironet Client Utility (ACU) or Aironet Desktop Utility (ADU), configure the
clients to run in ad−hoc mode. This is only a peer−to−peer connection. One PC becomes the
parent, while the other becomes the child.