Cisco Cisco WAP2000 Wireless-G Access Point - PoE Manual De Manutenção

Navigating the Web-Based Utility

Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide

15

 

This window allows you to configure the host name and IP address settings and to 
set the time through the following windows:

•

Basic Setup—Configures the Host Name and IP Address settings for this 
access point.

•

Time—Sets the time either manually, or automatically from a time server if 
the access point can access the public internet.

This window allows you to enter a variety of wireless settings for the access point.

•

Basic Settings—Chooses the wireless network mode (for example, 
wireless-G), wireless channel, and SSID configuration on this window.

•

Security—Configures the access point’s security settings including access 
authentication, data encryption, and wireless isolation.

•

Connection Control—Populates your access list to permit or block specific 
MAC addresses from accessing your wireless network.

•

Advanced Settings—Configures the access point’s more advanced 
wireless settings such as beacon interval and output power.

•

VLAN & QoS—Configures the VLAN and QoS related settings for the 
access point.

This window allows you to configure the access point operation mode with the 
Wireless Distribution System (WDS).

This window allows you to manage the access point.

•

Management—Configures the password and Simple Network 
Management Protocol (SNMP) settings.

•

Log—Configures the log settings for the access point.

•

Factory Default—Resets the access point to its factory default settings.