Cisco Cisco WAP371 Wireless-AC N Access Point with Single Point Setup Manual De Manutenção
Single Point Setup
Wireless Neighborhood
Cisco Small Business WAP371 Wireless Access Point Administration Guide
156
10
•
Dark Gray Bar—A dark gray bar and no signal strength number indicates the WAP
device itself that corresponds to the IP address listed above it. A signal strength of zero
is displayed because the device’s own signal strength is not measured.
device itself that corresponds to the IP address listed above it. A signal strength of zero
is displayed because the device’s own signal strength is not measured.
Viewing Details for a Single Point Setup Member
To view details on a cluster member, click the IP address of a member at the top of the page.
The following details for the device appear below the Neighbors list.
•
SSID—The Service Set Identifier for the neighboring access point.
•
MAC Address—The MAC address of the neighboring access point.
•
Channel—The channel on which the access point is currently broadcasting.
•
Rate—The rate in megabits per second at which this access point is currently
transmitting. The current rate is always one of the rates shown in Supported Rates.
transmitting. The current rate is always one of the rates shown in Supported Rates.
•
Signal—The strength of the radio signal detected from the access point, measured in
decibels (dB).
decibels (dB).
•
Beacon Interval—The beacon interval used by the access point.
•
Beacon Age—The date and time of the last beacon received from this access point.