Cisco Cisco WAP371 Wireless-AC N Access Point with Single Point Setup Manual De Manutenção

Getting Started

Using the Access Point Setup Wizard

Cisco Small Business WAP371 Wireless Access Point Administration Guide 

4

1

If you already have a cluster on your network, you can add this device to it by clicking Join an 
Existing Cluster, and then entering the Existing Cluster Name.

If you do not want this device to participate in a Single Point Setup at this time, click Do not 
Enable Single Point Setup.

(Optional) You can enter text in the AP Location field to note the physical location of the WAP 
device.

STEP  5

Click Next. The Configure Device - Set System Date and Time window appears.

STEP  6

Select your time zone, and then set the system time manually or set up the WAP device to get 
its time from an NTP server. For a description of these options, see 

STEP  7

Click Next. The Enable Security - Set Password window appears.

STEP  8

Enter a New Password and enter it again in the Confirm Password text box. For more 
information about passwords, see 

.

NOTE

You can uncheck the Password Complexity box if you wish to disable the 

password security rules. However, we strongly recommend keeping the password 
security rules enabled.

STEP  9

Click Next. The Enable Security - Name Your Wireless Network window appears for the 
Radio 1 interface. 

NOTE

For this window and the following two windows (Wireless Security and VLAN 

ID), you configure these settings for the Radio 1 interface first. Then the windows 
repeat to enable you to configure these settings for Radio 2.

STEP  10

Enter a Network Name. This name serves as the SSID for the default wireless network.

STEP  11

Click Next. The Enable Security - Secure Your Wireless Network window appears.

STEP  12

Choose a security encryption type and enter a security key. For a description of these options, 
see 

.

STEP  13

Click Next. The Wizard displays the Enable Security- Assign the VLAN ID For Your Wireless 
Network window.

STEP  14

Enter a VLAN ID for traffic received on the wireless network.

It is suggested that you assign a different VLAN ID from the default (1) to wireless traffic, in 
order to segregate it from management traffic on VLAN 1.

STEP  15

Click Next. 

STEP  16

For the WAP371 device, the Network Name, Wireless Security, and VLAN ID pages show to 
enable configuring Radio 2. When finished with configuring Radio 2, click Next.