Cisco Cisco WAP121 Wireless-N Access Point with Single Point Setup
18
Release Notes
CSCtw87635
Symptom:
Enabling Client QoS on SSID1 during WDS Bridge mode will disassociate
bridge connections.
Workaround:
Enable Client QoS on VAP’s other than 0.
CSCtw70914
Symptom:
Packet Capture fails to work using the Local file option using the WDS
interface.
Workaround:
Use the Remote option while using the WDS interface.
CSCtw62382
Symptom:
When using SNMP to backup the configuration file, apFileUpload does not
work.
Workaround:
Use the web interface to do the backup, or if using SNMP, use
apFileTransfer instead.
CSCtw47624
Symptom:
After a factory reset, the scheduler does not work properly until the WAP
device is power cycled.
Workaround:
After setting the scheduler for the first time, reboot the device and
the scheduler will function properly.
CSCts99306
Symptom:
In some scenarios, associated WLAN clients will fail redirecting to the
configured Redirect URL due to uncontrolled traffic originating on the client side without
user input.
user input.
Workaround:
Replaced the HTTP redirect without Captive Portal feature with the
Redirect URL feature on the Captive Portal > Instance Configuration page. To
redirect a URL, use the Redirect URL feature on the Captive Portal > Instance
Configuration page.
redirect a URL, use the Redirect URL feature on the Captive Portal > Instance
Configuration page.
Table 8
Open Caveats in Firmware Version 1.0.0.3
Ref Number
Description