Cisco Cisco WAP131 Wireless-N Dual Radio Access Point with PoE
Release Notes for the Cisco WAP131 and WAP351 Wireless-N Dual Radio Access Points Firmware Version 1.0.0.39
1
Release Notes
Release Notes for the Cisco WAP131 and
WAP351 Wireless-N Dual Radio Access Points
Firmware Version 1.0.0.39
WAP351 Wireless-N Dual Radio Access Points
Firmware Version 1.0.0.39
November 2014
These release notes describe the known issues in the Cisco WAP131 and
WAP351 Wireless-N Dual Radio Access Points firmware version 1.0.0.39.
WAP351 Wireless-N Dual Radio Access Points firmware version 1.0.0.39.
Known Issues
The following table lists the known issues in firmware version 1.0.0.39:
Ref Number
Description
CSCur36577
Some characters of the cluster location are dropped when
you set the Cluster Location settings through the Setup
Wizard.
you set the Cluster Location settings through the Setup
Wizard.
Workaround
Only use normal characters to define the
Cluster Location settings through the Setup Wizard.
CSCuq49207
The WDS bridge is established between two units in different
channels.
channels.
Workaround
Set up the WDS bridge in the same channel.
CSCur51986
The port status of the VLAN cannot return to its default status
after the VLAN ID (except VLAN 1) is deleted.
after the VLAN ID (except VLAN 1) is deleted.
Workaround
None.