Cisco Cisco WAP571E Wireless-AC N Premium Dual Radio Outdoor Access Point Manual De Manutenção
Administration
Email Alert
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
35
3
•
Administrative Mode—Choose to enable the email alert feature globally.
•
From Email Address—Enter the address to show as the sender of the email. The address
is a 255 character string with only printable characters. No address is configured by
default.
is a 255 character string with only printable characters. No address is configured by
default.
•
Log Duration—Choose the frequency at which scheduled messages are sent. The range
is from 30 to 1440 minutes. The default is 30 minutes.
is from 30 to 1440 minutes. The default is 30 minutes.
•
Scheduled Message Severity—Log messages of this severity level or higher are
grouped and sent to the configuration email address at the frequency specified by the
Log Duration. Select from these values: None, Emergency, Alert, Critical, Error,
Warning, Notice, Info, and Debug. If set to None, then no scheduled severity messages
are sent. The default severity is Warning.
grouped and sent to the configuration email address at the frequency specified by the
Log Duration. Select from these values: None, Emergency, Alert, Critical, Error,
Warning, Notice, Info, and Debug. If set to None, then no scheduled severity messages
are sent. The default severity is Warning.
•
Urgent Message Severity—Log messages of this severity level or higher are sent to the
configured email address immediately. Select from these values: None, Emergency,
Alert, Critical, Error, Warning, Notice, Info, and Debug. If set to None, then no urgent
severity messages are sent. The default is Alert.
configured email address immediately. Select from these values: None, Emergency,
Alert, Critical, Error, Warning, Notice, Info, and Debug. If set to None, then no urgent
severity messages are sent. The default is Alert.
STEP 3
In the Mail Server Configuration area, configure these parameters:
•
Server IPv4 Address/Name—Enter the IP address or hostname of the outgoing SMTP
server. (You can check with your email provider for the hostname.) The server address
must be a valid IPv4 address or hostname. The IPv4 address should be in a form similar
to xxx.xxx.xxx.xxx (192.0.2.10).
server. (You can check with your email provider for the hostname.) The server address
must be a valid IPv4 address or hostname. The IPv4 address should be in a form similar
to xxx.xxx.xxx.xxx (192.0.2.10).
A hostname can consist of one or more labels, which are sets of up to 63 alphanumeric
characters. If a hostname includes multiple labels, each is separated by a period (.). The
entire series of labels and periods can be up to 253 characters long.
characters. If a hostname includes multiple labels, each is separated by a period (.). The
entire series of labels and periods can be up to 253 characters long.
•
Data Encryption—Enter the mode of security for the outbound email alert. The alert can
be sent using secure TLS protocol or the default Open protocol. Using secure TLSv1
protocol can prevent eavesdropping and tampering during the communication across
the public network.
be sent using secure TLS protocol or the default Open protocol. Using secure TLSv1
protocol can prevent eavesdropping and tampering during the communication across
the public network.
•
Port—Enter the SMTP port number to use for outbound emails. The range is a valid port
number from 0 to 65535. The default port is 465. The port generally depends on the
mode used by the email provider.
number from 0 to 65535. The default port is 465. The port generally depends on the
mode used by the email provider.
•
Username—Enter the username for the email account that will be used to send these
emails. Typically (but not always) the username is the full email address including the
domain (such as Name@example.com). The specified account will be used as the email
address of the sender. The username can be from 1 to 64 alphanumeric characters.
emails. Typically (but not always) the username is the full email address including the
domain (such as Name@example.com). The specified account will be used as the email
address of the sender. The username can be from 1 to 64 alphanumeric characters.
•
Password—Enter the password for the email account that will be used to send these
emails. The password can be from 1 to 64 characters.
emails. The password can be from 1 to 64 characters.