Cisco Cisco WAP551 Wireless-N Single Radio Selectable Band Access Point Manual De Manutenção
Client Quality of Service
Client QoS Association
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
132
7
551/561
STEP 2
On WAP561 devices only, select the radio interface on which you want to configure the
association (Radio 1 or Radio 2).
association (Radio 1 or Radio 2).
STEP 3
From the VAP list, select the VAP on which you want to configure client QoS parameters.
STEP 4
Select Enable for the Client QoS Global to enable this feature.
STEP 5
Configure these parameters for the selected VAP:
•
Client QoS Mode—Select Enable to enable client QoS functionality on the selected
VAP.
VAP.
•
Bandwidth Limit Down—The maximum allowed transmission rate from the WAP
device to the client in bits per second (bps). The valid range is from 0 to 300 Mbps.
device to the client in bits per second (bps). The valid range is from 0 to 300 Mbps.
•
Bandwidth Limit Up—The maximum allowed transmission rate from the client to the
WAP device in bits per second (bps). The valid range is from 0 to 300 Mbps.
WAP device in bits per second (bps). The valid range is from 0 to 300 Mbps.
•
ACL Type Down—The type of ACL to apply to traffic in the outbound (WAP device-
to-client) direction, which can be one of these options:
to-client) direction, which can be one of these options:
-
IPv4—The ACL examines IPv4 packets for matches to ACL rules.
-
IPv6—The ACL examines IPv6 packets for matches to ACL rules.
-
MAC—The ACL examines Layer 2 frames for matches to ACL rules.
•
ACL Name Down—The name of the ACL applied to traffic in the outbound direction.