Cisco Cisco Aironet 1200 Access Point

CSCso02086—Unable to apply QoS settings on a standalone access point using the GUI

QoS settings cannot be applied on a standalone access point using the GUI regardless of which 
Internet browser used.

Workaround—Create the QoS policy and apply it to an interface using the command line interface.

CSCsg80305—When 16 SSIDs are configured, client devices sometimes fail to associate to the 16th 
SSID. 

Workaround: Save the configuration and reload the UC520.

CSCso07171—Fast roaming fails when CCKM is enabled on an access point in workgroup bridge 
mode. 

When CCKM is enabled in infra-root access points in workgroup bridge mode, fast roaming fails. 
This issue also seen on ADU CB21AG/PI21AG card clients. It is working correctly with ACU 11a 
card clients.

CSCsd99067—AVVID priority map incorrectly maps CoS 5 to CoS 7 within same VLAN.

THE AVVID priority mapping in the CoS advanced parameters is incorrectly mapping the CoS value 
to 7 when making a call to a wired phone in same VLAN. This situation occurs in an 802.11g 
network running one 7921 and one access point.

Workaround—None.

CSCse34644—Shared authentication with a non-native VLAN does not operate properly.

This situation occurred on 
flash:/c1130-k9w7-mx.v123_8_ja.20060520/c1130-k9w7-mx.v123_8_ja

Workaround—Save the configuration, and reload the access point. When the access point comes up 
and the clients get authenticated, edit the shared authentication SSID as follows:

Add open authentication.

Removed shared authentication.

Remove open and add shared authentication. The client should associate.

Reload the access point.

CSCsk05871—Sometimes packets are not marked as voice to 7921 phones.

Condition: A 7921 phone talking to a non-WMM client (a 7920 phone, for example), a wired client, 
or another 7921 client with WMM disabled.

Workaround: None.