Cisco Cisco Prime IP Express 8.3 Referências técnicas

 

    dhcp-interface - Configures the DHCP server's network interfaces

  Synopsis

 

    dhcp-interface <name> create [<attribute>=<value>] 
    dhcp-interface <name> delete
    dhcp-interface list  
    dhcp-interface listnames
    dhcp-interface listbrief
    dhcp-interface <name> show
    dhcp-interface <name> set <attribute>=<value> [attribute>=<value> ...]
    dhcp-interface <name> get <attribute>
    dhcp-interface <name> unset <attribute>

    dhcp-interface <name> enable <attribute>
    dhcp-interface <name> disable <attribute>

  Description

 

    The dhcp-interface command configures network interfaces for use
    by the Network Registrar DHCP server. If there are no defined 
    interfaces, the server discovers and uses all available 
    interfaces on the system. When this list is present, the server
    uses only the available interfaces, if any, that match this list.

  Examples

 

  Status

 

  See Also
   
 
  Attributes
 
 

address 

 

Specifies the IP address and subnet mask length of one or more
interfaces that the DHCP server should use.

 

ip6address 

 

Specifies the IPv6 address and prefix length of one or more
interfaces that the DHCP server should use.

 

multicast-addresses 

(obj(0)) default = ff02::1:2,ff05::1:3

 

Enables or disables the specified multicast addresses on DHCP
interfaces. The default multicast addresses are ff02::1:2 and
ff05::1:3.  DHCPv6 requires address ff02::1:2, if any DHCPv6 clients
are directly connected to the link associated with the interface.
The address ff05::1:3 is the default multicast addresses used by
relay agents when relaying DHCPv6 requests.

 

name 

 

Specifies the user-assigned name of the DHCP server interface.

 

    dhcp-listener - Configures a TCP dhcp-listener for DHCP.

  Synopsis