Cisco Cisco Prime Network Registrar Jumpstart 8.3 Guia Da Instalação
1
Cisco Systems, Inc.
www.cisco.com
Cisco Prime Network Registrar Jumpstart
8.3 Quick Start Guide
8.3 Quick Start Guide
July 6, 2015
Introduction
The Cisco Prime Network Registrar Jumpstart product is a complete solution for using the Cisco Prime Network Registrar
application to manage DHCP, DNS, and Caching DNS servers. It includes the following components:
application to manage DHCP, DNS, and Caching DNS servers. It includes the following components:
Cisco Prime Network Registrar 8.3 application software
Linux CentOS 6.5 Operating System
VMware ESXi 5.5 Hypervisor
Cisco UCS C220 M3 Hardware
These components are integrated together into a single flexible and easy to use appliance (see
Figure 1
Cisco Prime Network Registrar Jumpstart Configuration
shows the three primary layers in the Cisco Prime Network Registrar Jumpstart appliance. Each of these layers
has its own capabilities. Each of these layers can be controlled independently as well as remotely, and each requires its
own independent connection to the network. Thus, three unique IP addresses are required.
own independent connection to the network. Thus, three unique IP addresses are required.
You may only need to connect to the Cisco Prime Network Registrar Web UI to perform IP address management tasks,
but you may also need to connect to one of the other layers to perform system management or troubleshooting tasks
related to the appliance.
but you may also need to connect to one of the other layers to perform system management or troubleshooting tasks
related to the appliance.
Port 8080
Cisco Prime Network Registar Local
Port 8090
Cisco Prime Network Registrar Regional
Linux CentOS 6.5 Operating System
Cisco UCS C220 M3 Hardware
VMware ESXi 5.5 Hypervisor
VMware Virtual Machine
403272
Linux OS IP
(vaip)
ESXi IP
(esxip)
CIMC IP
(ucsip)