Cisco Cisco Evolved Programmable Network Manager 2.0 Guia Do Programador
MTOSI Interface Details
Cisco EPN Manager 2.0.3 MTOSI API Guide for OSS Integration
99
Carrier Ethernet
Endpoint Service
Order Data
Endpoint Service
Order Data
Data Type
Applicable to
ServiceType
ServiceType
Description
portRef
NamingAttrib
uteType
uteType
UNI
FDN of the port to use - set of RNDs that
consists of MD, ME and PTP or FTP instance ids.
For example:
<portRef>
<rdn><type>MD</type><value>CISCO
_EPNM</value></rdn>
<rdn><type>ME</type><value>87950
9 </value></rdn>
<rdn><type>PTP</type><value>9897
60 </value></rdn>
</portRef>
consists of MD, ME and PTP or FTP instance ids.
For example:
<portRef>
<rdn><type>MD</type><value>CISCO
_EPNM</value></rdn>
<rdn><type>ME</type><value>87950
9 </value></rdn>
<rdn><type>PTP</type><value>9897
60 </value></rdn>
</portRef>
uniName
String
UNI
Name of the new UNI to be created.
uniDescription
String
UNI
Description of the new UNI to be created.
qosProfile
NamingAttrib
uteType
uteType
UNI
Service QoS Profile Reference. FDN of the
existing QoS profile with MD, QOS_PROFILE
RDNs.
existing QoS profile with MD, QOS_PROFILE
RDNs.
portMtuSize
Integer
UNI
The Maximum Transmission Size, in bytes, of a
packet passing through the interface. The MTU
of the UNI must be greater than or equal to the
MTU defined on the service level.
packet passing through the interface. The MTU
of the UNI must be greater than or equal to the
MTU defined on the service level.
portSpeedRate
String
UNI
Port speed. You can reduce the speed if this is
supported on the port.
supported on the port.
portMode
String
UNI
Mode values:
• FULL DUPLEX—Uses simultaneous
communication in both directions between the
UNI and the customer’s access switch, assuming
that both sides support full duplex. If one side
does not support full duplex, the port will be
brought down.
• AUTO NEGOTIATION —Uses the mode that is
agreed upon between the two devices,
depending on what is supported. Full Duplex
will be attempted but if one device does not
support it, half duplex will be used.
• FULL DUPLEX—Uses simultaneous
communication in both directions between the
UNI and the customer’s access switch, assuming
that both sides support full duplex. If one side
does not support full duplex, the port will be
brought down.
• AUTO NEGOTIATION —Uses the mode that is
agreed upon between the two devices,
depending on what is supported. Full Duplex
will be attempted but if one device does not
support it, half duplex will be used.
portEnableLinkMana
gement
gement
Boolean
UNI
Enables the customer access switch to get
information about this UNI, VLAN IDs, and
services on the UNI, and so on.
information about this UNI, VLAN IDs, and
services on the UNI, and so on.
portEnableLinkOAM
Boolean
UNI
Enables IEEE 803.1ah link operation and
maintenance. If Link OAM is enabled, you will
see events relating to the state of the link
between this UNI and the customer’s access
switch.
maintenance. If Link OAM is enabled, you will
see events relating to the state of the link
between this UNI and the customer’s access
switch.
ceVlanId
String
VLAN-based
VCs
VCs
Untagged CE-VLAN ID – e.g. 1333.
The ID of the CE-VLAN assigned to untagged
traffic.
The ID of the CE-VLAN assigned to untagged
traffic.
serviceMultiplexing
Boolean
VLAN-based
VCs
VCs
Allows the UNI to participate in more than one
EVC instance.
EVC instance.
uniBundling
Boolean
VLAN-based
VCs
VCs
UNI Allows Bundling.
Allows the use of multiple VLANs for this UNI.
Allows the use of multiple VLANs for this UNI.