Cisco Cisco Evolved Programmable Network Manager 1.2 Guia Da Instalação

When Cisco EPN Manager in an HA deployment, be sure to consider the following items before performing the installation. All 
of these items are described in 

Network bandwidth and latency restrictions

Virtual IP addresses

Deployment model

Failover type

Make sure you have met all the requirements listed in 

Before you begin deploying the OVA, make sure you have met all the requirements listed in 

Launch your VMware vSphere client.

Choose File > Deploy OVF Template.

In the Deploy OVF Template window, click Browse and select the OVA file. 

Click Next.

Accept the End User License Agreement, and then click Next.

In the OVF Template Details window, verify the OVA file details including the product name, version, and size, and 
then click Next.

In the Name and Location window, specify a name and location for the template that you are deploying. The name must 
be unique within the inventory folder, and can contain up to 80 characters.

Select the configuration type as Professional, and then click Next. 

Based on your network size (see 

), you can choose Standard, Express, or Express Plus for 

demo or lab purposes.

Select the cluster or host to install the OVA, and then click Next.

Select the destination storage for the OVA to be deployed, and then click Next.

Select the disk format as Thick Provision Lazy Zeroed or Thick Provision Eager Zeroed for deployment and Thin 
Provision for lab or demo installation. 

Cisco recommends you to select Thick Provision Eager Zeroed disk format for deployment.

Click Next.

Select the network mapping based on the IP configured, and then click Next. 

Verify your options in the Ready to Complete window.