Cisco Cisco 1 GHz GainStar Node Guia Da Instalação
Connecting the Fiber Optic Service Cable to the Mini Node
OL-31947-02
29
Connecting the Fiber Optic Service Cable to the
Mini Node
Mini Node
Warning: Radiation
WARNING:
Avoid personal injury! Use of controls, adjustments, or procedures
other than those specified herein may result in hazardous radiation
exposure.
other than those specified herein may result in hazardous radiation
exposure.
Avoid personal injury! The laser light source on this equipment (if a
transmitter) or the fiber cables connected to this equipment emit
invisible laser radiation. Avoid direct exposure to the laser light source.
transmitter) or the fiber cables connected to this equipment emit
invisible laser radiation. Avoid direct exposure to the laser light source.
Avoid personal injury! Viewing the laser output (if a transmitter) or
fiber cable with optical instruments (such as eye loupes, magnifiers, or
microscopes) may pose an eye hazard.
fiber cable with optical instruments (such as eye loupes, magnifiers, or
microscopes) may pose an eye hazard.
Do not apply power to this equipment if the fiber is unmated or unterminated.
Do not stare into an unmated fiber or at any mirror-like surface that could reflect
light emitted from an unterminated fiber.
Do not view an activated fiber with optical instruments (for example, eye loupes,
magnifiers, microscopes).
Use safety-approved optical fiber cable to maintain compliance with applicable laser
safety requirements.
Do not stare into an unmated fiber or at any mirror-like surface that could reflect
light emitted from an unterminated fiber.
Do not view an activated fiber with optical instruments (for example, eye loupes,
magnifiers, microscopes).
Use safety-approved optical fiber cable to maintain compliance with applicable laser
safety requirements.
Fiber Cable Handling
With repeated use, optical connectors can become dirty or scratched. This can
seriously degrade system performance. It is critical that the connectors be
maintained in good condition. Do not disconnect or connect any connectors unless
absolutely necessary. Always clean both halves of each connector with alcohol
solution (99% recommended) and lint-free wipes when preparing to join the two
halves. Use compressed air to clean the adapter.
Note: A ferrule cleaner, part number 468517, may be ordered for use with SC style
connector.
seriously degrade system performance. It is critical that the connectors be
maintained in good condition. Do not disconnect or connect any connectors unless
absolutely necessary. Always clean both halves of each connector with alcohol
solution (99% recommended) and lint-free wipes when preparing to join the two
halves. Use compressed air to clean the adapter.
Note: A ferrule cleaner, part number 468517, may be ordered for use with SC style
connector.
Fiber Connectors and Fiber Optical Service Cable
The following illustration shows the fiber connectors available with the GainStar
Mini Node when using fiber optic service cables.
Mini Node when using fiber optic service cables.