Philips Wi-Fi component Hi-Fi system MCI730 MCI730/05 Manual Do Utilizador

21

Wired connection

 

Connect to the router by using the Ethernet 
cable

1

 Select 

[Yes], when asked whether to set 

up network connection (see ‘First-time 
setup’ on page 18). 

2

  Use an Ethernet cable to connect the unit 

to the router.

  

Connect to the home network

On the unit, select 

• 

[Wired (Ethernet)].

The unit starts to acquire an IP address 

 

»

assigned by the network automatically.
A message appears when the 

 

»

connection is completed successfully. 

MCi730

3

  Select the desired Wi-Fi network. 

4

  As prompted, enter the encryption key to 

the network. 

The unit starts to acquire an IP 

 

»

address assigned by the Wi-Fi network 
automatically.
A message appears when the 

 

»

connection is completed successfully. 

  

 

  

Note

The router may fail to assign an IP address, 

 

•

if the DHCP (Dynamic Host Configuration 
Protocol) is unavailable or disabled on the 
router. 

Enter key

Successfully 

connected to 

Network A

English

EN