Philips Wi-Fi component Hi-Fi system MCI730 MCI730/05 Manual Do Utilizador

Códigos do produto

MCI730/05

Date and time

The date and time can be set automatically or
manually.

Automatic setting

For automatic clock setting, use the online
service over the Internet.

Through the online service over the Internet

Turn on the unit, if necessary.

Ensure that the unit is connected to

•

the home network and Internet.

From Home screen, select [Settings] >

[Clock settings] > [Date and time].

[Date and time], select [Current date

and time] > [Automatic (Internet)].

The unit starts auto time setting over

the Internet.
A message appears when the setting

is done.

Tip

According to the location and time zone you

•

select, the unit can have the clock time set
and adjusted automatically through the online
service over the Internet.
To check and change current location and time

•

zone, go to [Settings] > [Location and time
zone].

Automatic (Internet)

Manual

To set the alarm time,

Press and hold

•

/ , or press

/ repeatedly until you reach the

desired digits. Press / to select the
entry location. Press OK to conﬁrm.

Or, enter the desired digits by

•

pressing the numeric buttons.

The alarm icon

appears on the

screen.

Use the alarm

At the set alarm time, the buzzer sounds.

Note

The alarm sounds even if you have switched

•

MCi730 to active standby or Eco standby.
MCi730 is unmuted if it has been muted.

•

The alarm sounds in a higher volume if the

•

volume level is lower than minimum.

To snooze the alarm

Press any button on the unit or

•

the remote control (except for the
volume buttons).

The alarm sounds again 15

minutes later. The alarm icon
remains.

To stop the alarm

Press and hold

•

or .

The alarm is stopped. The alarm

icon disappears.
The alarm sounds again next day.

To turn off the alarm

Go to

•

[Settings] > [Clock settings]

> [Alarm]. Select [Alarm off] and
tap on OK.