Cisco Cisco PowerVu Model D9828 Multiple Decryption Receiver Ficha De Dados
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 2 of 4
●
Tuning preset configurations
●
In-Band Control Computer (IBCC) system support for control of elements such as tuning parameters, ASI
output selection, and addressing and grouping of individual or groups of D9804 receivers
Product Specifications
Table 1 lists product specifications.
Table 1.
Specifications: Cisco D9804 Multiple Transport Receiver
Specification Category
Specification
Physical and Power
Physical specifications
●
Height: 1.72 in. (4.37 cm)
●
Width: 17.25 in. (43.80 cm)
●
Depth: 15.75 in. (40.00 cm)
●
Weight: approximately 10 lb (4.5 kg)
Electrical specifications
●
Dual power supplies
●
Voltage range: 100V to 240V AC
●
Line frequency: 50/60 Hz
●
Power consumption: 107W maximum
●
LNB power on RF1 to RF 3: +13V to +18V at 350 mA maximum
Note: No power is supplied to RF 4
Environmental
Operating temperature
32° to 122° F (0° to 50°C )
Storage temperature
-4° to 158° F (-20° to 70° C)
Relative operating humidity
Based on the humidity limitations of the Sharp tuner, the D9804 is expected to meet the following humidity
specifications (without condensation):
specifications (without condensation):
●
95% humidity is valid up to 40° C
●
91% humidity is valid up to 45° C
●
70% humidity is valid up to 50° C
These specifications are based on test results from the Tuner module vendor.
Relative storage humidity
5 to 95% non-condensing
Note: Not to exceed 0.024 kg water or dry air
Operating altitude
-61 to 3048m (up to 2000m conforms to IEC/EN/UL/CSA 60950-1 requirements)
System
ETSI standards
●
EN 300 421 DVB; framing structure, channel coding, and modulation for 11/12 GHz satellite services