Cisco Cisco D9804 Multiple Transport Receiver Guia Da Instalação
Chapter 5 Setup and Monitoring
108
78-4042990-01 Rev B
Setting up ASI Input
Proceed as follows to set the ASI Input:
1 From the user interface of the D9804 MTR, click the Setup tab, and then click the
1 From the user interface of the D9804 MTR, click the Setup tab, and then click the
ASI-IN icon from the sub-page.
2 Select the Comma Required to allow the use of direct DTF ASI output as an
input source to the D9804 MTR. Select the comma required value as needed.
Select 0 to allow up to the maximum DTF output rate.
Note: If the D9804 MTR is used to decombine and descramble the output data
from the ASI Input, then a maximum rate for the input containing scrambled
PIDs is 140 Mbps.
Select 0 to allow up to the maximum DTF output rate.
Note: If the D9804 MTR is used to decombine and descramble the output data
from the ASI Input, then a maximum rate for the input containing scrambled
PIDs is 140 Mbps.