Cisco Cisco D9804 Multiple Transport Receiver Guia Da Instalação
Setup Menu
78-4042990-01 Rev B
73
Menu Item
Description
Parameters
Trap ID Address
Up to 10 entries can be assigned to
the Trap Destination and
Community string fields.
the Trap Destination and
Community string fields.
Trap Destination
Address
Address
This sets the destination for SNMP
trap messages for events (i.e., fault
messages).
trap messages for events (i.e., fault
messages).
IP address. Up to 12 characters, e.g.,
155.128.100.200.
155.128.100.200.
Trap Community
String
String
This sets the Community string for
the Trap Destination above.
the Trap Destination above.
Public or custom string. Up to 35
characters. The default is public.
characters. The default is public.
Reset HTTP User
Name & Password
Name & Password
Resets the Web Interface’s user name
and password to its default settings.
These parameters are case-sensitive.
The default user name is “user” and
the default password is “USER”.
and password to its default settings.
These parameters are case-sensitive.
The default user name is “user” and
the default password is “USER”.
Abort or Continue
HTTP User
Name/HTTP
Password
Name/HTTP
Password
You can change the default user
name and password for the Web
Interface.
name and password for the Web
Interface.
Up to 15 characters
Setup Menu: Telemetry
To view the Telemetry menu from the Main menu, press the RIGHT Arrow key
once and then the SELECT key to reach the Setup menu. Then press the RIGHT
arrow key six times and the SELECT key to view the Telemetry menu.
once and then the SELECT key to reach the Setup menu. Then press the RIGHT
arrow key six times and the SELECT key to view the Telemetry menu.
The Telemetry menu has the following structure: