Cisco Cisco Surge-Gap Passives Guia Da Instalação
Removing the Faceplate
To Remove a Faceplate with Feeder Cables Connected (Hot Install)
Follow these steps to remove a faceplate with feeder cables already connected to the
housing.
WARNING:
When removing the faceplate with the feeder cables attached, take care to
When removing the faceplate with the feeder cables attached, take care to
protect yourself from electrical shock and your equipment from damage.
Certain components can deliver an electrical shock.
1. Remove all coax drop cables from the drop port F-connectors.
2. Using a 3/8-in. wrench, loosen all faceplate bolts.
3. If the housing is installed on a strand, go to step 4.
2. Using a 3/8-in. wrench, loosen all faceplate bolts.
3. If the housing is installed on a strand, go to step 4.
If the housing is installed on a pedestal, go to step 5.
4. Attach a grounding wire assembly to the strand wire and a drop port
F-connector.
Proceed to step 6.
5. Attach a grounding wire assembly to the strand clamp bolt on the pedestal and
a drop port F-connector.
Front View:
Front View:
OL-31976-01
21