Cisco Cisco Content Delivery Engine 250 Guia Da Instalação

 
 

k. Click on “Upload Firmware”, this will take a few minutes to complete 
l.  Click “OK” at the follow prompt 

 

m. 

Click on “Start Upgrade”

 

 

 

n.  Click “OK” at the following prompt: 

 

o.  The upgrade will now proceed 

 

p.  Once the upgrade has completed it will return to Login screen. 
q.  It is recommended that the BMC/IPMI system be reset after the upgrade by 

removing power from the power supplies waiting 10 seconds then replacing the 
power.  

After the IPMI firmware upgrade has been completed and the system power-cycled, validation of 
a successful upgrade should be performed.