Cisco Headend System Release 2.5 Guia Do Utilizador
4011043 Rev B
Setting Up the TSBroadcaster
2-7
Configure the DNCS for the TSBroadcaster, Continued
16. Click Apply.
Result: The system saves this information into the DNCS database. The
previously disabled Connectivity tab becomes available.
17. On the Set Up MQAM window, click the Connectivity tab.
Result: The Connectivity window opens with an illustration of the devices
already connected to this MQAM modulator.
18. If not already selected, click to select the Input 1 Port option.
19. In the Connect To area, click the Headend Name arrow and select the
19. In the Connect To area, click the Headend Name arrow and select the
headend that contains the MPEG source that is physically connected to the
selected input port on this MQAM modulator.
20. Click the Device Type arrow and select the IRT type for the MPEG source
device being used to send data to the selected input port on this MQAM
modulator.
21. Click the Device Name arrow and select the name previously defined for the
MPEG source associated with the selected input port on this MQAM
modulator.
Example: satsb
Example: satsb
22. Click Apply.
Result: The system saves this information into the DNCS database and
updates the screen so that it shows the information you entered.
23. The next step is to create a session for the TSBroadcaster. Go to Create a
Session for the TSBroadcaster, next in this section.