Cisco Headend System Release 2.5 Guia Da Instalação
B-4
RNCS Rollback Procedure
78-4003191-01 Rev B
Roll Back the RNCS Software,
Continued
3.
Type lustatus and then press Enter.
Result: The system displays the status of the LiveUpgrade boot
Result: The system displays the status of the LiveUpgrade boot
environment.
Example: You should see results similar to this example:
Example: You should see results similar to this example:
BE_name Complete Active ActiveOnReboot CopyStatus
------------------------------------------------------------------------
1.0.0.x yes no yes -
LIONN_V1.0.0.x yes yes no -
Note: The example shows that the old RNCS environment will become
active after the next reboot.
4.
Type shutdown -g0 -y -i6 and then press Enter.
Important: Do not use the reboot or halt command to reboot the server.
Results: The system reboots and activates the old RNCS software.
Important: Do not use the reboot or halt command to reboot the server.
Results: The system reboots and activates the old RNCS software.
5.
Type lustatus and then press Enter.
Result: The system displays the status of the LiveUpgrade boot
Result: The system displays the status of the LiveUpgrade boot
environment.
Example: You should see results similar to this example:
Example: You should see results similar to this example:
BE_name Complete Active ActiveOnReboot CopyStatus
------------------------------------------------------------------------
1.0.0.x yes yes yes -
LIONN_V1.0.0.x yes no no -
Note: The example shows that the new RNCS version is active.
6.
Go to Attaching Mirrors, next in this appendix.