Cisco Headend System Release 2.5
Create an MPEG Source
4004148 Rev C
119
6 Follow these instructions to configure the Port Number Prompt window.
a In the Output Port field, type 0 (zero).
b In the TSID field, type a transport stream ID (TSID) that is equal to the input
b In the TSID field, type a transport stream ID (TSID) that is equal to the input
TSID for the BFS QAM.
c If the Transport Protocol field does not display ASI, click the arrow to the
right of the field and select ASI.
d Click OK. The Set Up MPEG Source window reappears and the new
configuration is saved.