Cisco Headend System Release 2.5 Guia Da Instalação
Chapter 1 Alarm Manager Pre-Installation Checklist
16
78-745262-01Rev C
Requirement
Yes
No
Follow these instructions to determine whether you have a partition on each
Alarm Manager server that has at least 145 MB of available disk space, plus
an additional 10 MB for each DNCS system you will monitor.
Note: This is the partition where you will install the Alarm Manager server
Note: This is the partition where you will install the Alarm Manager server
software.
1
From an xterm window on each server, type df -k and then press Enter.
Result: The output that appears looks similar to the following:
Result: The output that appears looks similar to the following:
Notes:
–
–
Note that each of the listed filesystems in this example has enough
space to install the Alarm Manager software.
–
Our engineers recommend that you install the Alarm Manager
software in the /export/home directory.
2
Is there a partition on each server that has at least 145 MB of available
disk space, plus an additional 10 MB for each DNCS system you will
monitor?
Does each Alarm Manager server have at least two Ethernet adapters?
Note: Ask your network administrator if you do not know how to determine
Note: Ask your network administrator if you do not know how to determine
this.