Cisco Headend Digital Broadband Delivery System Guia Da Instalação
Chapter 2 Configure the DNCS for xOD
18
78-4004034-01 Rev C
Add Entries to the DNCS Hosts Table
Overview
After you add a VASP entry for the video server or session gateway, you must add
the IP addresses and host names for the video server or session gateway and for the
ASI Server to the DNCS hosts table. This process allows you to type the host name,
which is usually easier to remember, rather than the IP address every time you need
to work with a component through the DNCS.
Before You Begin
Before you begin, you must have the following items:
IP address for the video server or session gateway as entered for its VASP entry
IP address for the ASI server (from your system administrator)
Super user (su) privileges and password (from your system administrator)
Adding Entries to the DNCS Hosts Table
Complete these steps to add entries for the video server or session gateway and for
the ASI server to the DNCS hosts table.
1 Use the mouse to place the cursor on any open area on the DNCS desktop, and
1 Use the mouse to place the cursor on any open area on the DNCS desktop, and
then click the middle mouse button. A dropdown menu appears with a list of
options.
2 Click the left mouse button and select xterm. An xterm window opens.
3 Log in as su. A prompt appears.
4 Type vi /etc/hosts and press Enter. The /etc/hosts file opens in vi editor.
5 Insert a blank line and add an entry for the session gateway using the following
4 Type vi /etc/hosts and press Enter. The /etc/hosts file opens in vi editor.
5 Insert a blank line and add an entry for the session gateway using the following
format:
For an ISA system: xxx.xx.xx.xxx sessiongateway
Note: In the format shown above, xxx.xx.xx.xxx represents the IP address.
For an ISA system: xxx.xx.xx.xxx sessiongateway
Note: In the format shown above, xxx.xx.xx.xxx represents the IP address.