Cisco Analog Modem Firmware Folheto

Release Notes for Analog Modem Firmware Version 1.2.0  5

These problems in firmware version 1.0.3 were fixed in version 1.2.0:

•

CSCdk55253—Add fax Class 2 and 2.0 support.

•

CSCdk78111—Slip & PPP performance problem.

•

CSCdm02750—AT-O parity command does not work.

•

CSCdm04230—Ring detection problem with high ring voltage.

This problem in firmware versions 1.0.1 and 1.0.2 was fixed in version 1.0.3: 

•

CSCdk71609—DAA Current Limit setting incorrect.

This problem in firmware versions 1.0.0 and 1.0.1 was fixed in version 1.0.2: 

•

CSCdk43602—Bell 103 connections fail. 

These problems in firmware version 1.0.0 were fixed in version 1.0.1: 

•

CSCdk35161—Fails V.42bis negotiation with U.S. Robotics internal modem.

•

CSCdk31146—Hardware homologation changes to add TBR 21 support. 

For the latest information on known problems, follow these steps to consult Cisco Connection 
Online (CCO):

Connect to CCO as directed in the “Cisco Connection Online” section on page 6. 

On the CCO home page, click LOGIN, which appears in green in the menu bar at the top 
of the page, and log into CCO. (If you are not a registered CCO user, follow the 
instructions to register so you can log in.)

Click Software & Support on the CCO home page.

On the Software & Support page, click Technical Tools.

On the Technical Tools page, click Bug Toolkit II. 

Use one of the tools to get up-to-date bug information. For example, click Search for Bug 
by ID Number, then enter a bug ID, such as CSCdj80580, when prompted. 

For instructions on using the bug tools, click Help—How to Use the Bug Toolkit at the 

bottom of the Bug Toolkit II page. 

To find out what modem firmware version you have now, enter the show modem version command 
at the EXEC prompt, 

Router> 

or

 Router#

:

Router> show modem version

Slot1: MCOM Analog Integrated Modem Firmware

Source: slot1:1:c3600-2600-analog-fw.1.2.0.bin

Boot firmware: 1.1.5

MIMIC firmware: 1.3.3

Modem firmware: 2.3.8

DSP firmware: 0.0.2