Cisco Headend Digital Broadband Delivery System Guia Da Instalação
Map a Service to a Channel
4019969 Rev B
45
Map a Service to a Channel
Overview
Mapping a service to a channel allows you to add the service to a channel map so
that your subscribers can access it by tuning to a particular channel. This section
provides the procedures for mapping the InView service to a specific channel.
Mapping a Service to Channel
1 From the DNCS Administrative Console, click the Application Interface Modules
tab and then click Channel Maps. The Display Channel Map window opens.
2 Double-click Default. The Set Up Display Channel Map window opens for the
default channel map.
3 Scroll though the Available Services field until you see the InView service, and
then click to select that service.
4 Scroll through the Channel Slot fields until you see the channel to which you
want to assign the InView service.
Note: This will be the channel on which the InView application is launched.
Note: This will be the channel on which the InView application is launched.
5 Click Add. The service name moves from the Available Services field to the
Channel Slot field.
6 Click Save.