Cisco Headend Digital Broadband Delivery System Guia Da Instalação
Connecting to the Console of the RNCS Server
78-4021167-01 Rev D
9
Connecting to the Console of the RNCS Server
After configuring the ALOM or ILOM port of the RNCS server, you are ready to
complete the following steps to connect to the console of the server.
1 Choose one of the following options:
1 Choose one of the following options:
If you are connecting to the ALOM port of the Sun Fire V445 server, go to
step 2.
If you are connecting to the ILOM port of the Netra T5220 server, go to step
3.
2 Complete the following steps to remotely log on to the ALOM port of the Sun
Fire V445 server.
a Type telnet [IP address of ALOM port] and press Enter. A prompt for the
a Type telnet [IP address of ALOM port] and press Enter. A prompt for the
user ID appears.
Note: Substitute the IP address of the ALOM port for [IP address of ALOM
port].
Example: telnet 10.201.0.2
Example: telnet 10.201.0.2
b Type the admin user ID and press Enter. A prompt for the password appears.
c Type the password for the admin user and press Enter. The sc > prompt
c Type the password for the admin user and press Enter. The sc > prompt
appears as the system establishes a telnet session between the ISDS and the
ALOM port.
d Go to step 4.
3 Complete the following steps to remotely log on to the ILOM port of the Netra
T5220 server.
a Type ssh [IP address of ILOM port] and then press Enter. A prompt for the
a Type ssh [IP address of ILOM port] and then press Enter. A prompt for the
user ID appears.
Note: Substitute the IP address of the ILOM port for [IP address of ILOM
port].
Example: ssh 10.201.0.2
Example: ssh 10.201.0.2
b Type the admin user ID and press Enter. A prompt for the password appears.
c Type the password for the admin user and press Enter. The -> prompt
c Type the password for the admin user and press Enter. The -> prompt
appears as the system establishes a secure shell connection between the ISDS
and the ILOM port.
d Go to step 5.