Cisco Headend System Release 2.7 Guia Da Instalação
Chapter 1 Initial Installation of RNCS Software
16
4022447 Rev B
Connecting to the Console of the RNCS Server
After configuring the ALOM port of the RNCS server, you are ready to complete the
following steps to connect to the console of the server.
1 Complete the following steps to remotely log on to the ALOM port of the RNCS
following steps to connect to the console of the server.
1 Complete the following steps to remotely log on to the ALOM port of the RNCS
server.
a Type telnet [IP address of ALOM port] and press Enter. A prompt for the
a Type telnet [IP address of ALOM port] and press Enter. A prompt for the
user ID appears.
Note: Substitute the IP address of the ALOM port for [IP address of ALOM
port].
Example: telnet 10.201.0.2
port].
Example: telnet 10.201.0.2
b Type the admin user ID and press Enter. A prompt for the password appears.
c Type the password for the admin user and press Enter. The sc > prompt
c Type the password for the admin user and press Enter. The sc > prompt
appears as the system establishes a telnet session between the DNCS and the
ALOM port.
ALOM port.
2 Type console -f and press Enter.
Results:
A message appears that instructs the user on how to return to the ALOM
port.
port.
Control of the server is returned to the console, rather than the ALOM port.
3 Go to Install the RNCS Software (on page 17).