Cisco Headend System Release 2.7 Guia Da Instalação
Chapter 2 Installing the Software
34
4023373 Rev B
3 Type 2 to select Startup/Shutdown Single Element Group and press Enter. A
list of all the SARA Server processes appears and shows their current working
states (running or stopped).
states (running or stopped).
4 On the Applications Control window, press Enter to update the working states
of the SARA Server processes. Continue to press Enter every few seconds until
all processes show Curr Stt: running(2).
Note: You will not see a status message while the processes are restarting.
all processes show Curr Stt: running(2).
Note: You will not see a status message while the processes are restarting.
5 When the Application Control window indicates that the current state
of each process is running, follow the on-screen instructions to close the
Applications Control window.
Note: On some systems, the BFS process may remain at stopped. This is normal.
Applications Control window.
Note: On some systems, the BFS process may remain at stopped. This is normal.
6 Go to Restarting cron Jobs (on page 34).
Restarting cron Jobs
After starting the system components, restart the cron jobs on the DNCS and the
Application Server. Complete the procedures listed in this section to restart the cron
jobs on the DNCS and on the SARA Server.
Application Server. Complete the procedures listed in this section to restart the cron
jobs on the DNCS and on the SARA Server.
Note: The cron jobs may have restarted on their own when you restarted the DNCS
and SARA Server processes, earlier in this chapter.
and SARA Server processes, earlier in this chapter.
Restarting the cron Jobs on the DNCS
1 If necessary, open an xterm window on the DNCS.
2 To confirm that the cron jobs are not running type pgrep -fl cron and press
1 If necessary, open an xterm window on the DNCS.
2 To confirm that the cron jobs are not running type pgrep -fl cron and press
Enter.