Cisco Headend System Release 2.5 Guia Do Utilizador
6-4
Track Progress of the emmDistributor With the emmlst Utility
749640 Rev D
How to Use the emmlst Utility
How EMMs are Distributed
The DNCS is typically configured to have EMMs expire within 30 days. The
camAuditor process is designed to re-encrypt EMMs when the EMMs age to the
point where they will expire within 19 days, or less. As stated in the Overview
section of this chapter, the emmDistributor process cycles through the database and
refreshes DHCTs with their newly encrypted EMMs. It may take several days for the
emmDistributor process to completely cycle through a large database.
DHCTs may not receive their newly encrypted EMMs under the following
DHCTs may not receive their newly encrypted EMMs under the following
circumstances:
•
•
The DHCT is rebooting.
•
The subscriber has powered-off the DHCT.
•
Network problems prevent the delivery of EMMs to a DHCT.
Important: DHCTs that do not receive EMMs will time out and will be unable to
support encrypted services.
Cisco’s Recommendation for Systems Running SR 1.5.1
Cisco recommends that system operators run the emmlst utility at least once a day to
ensure that the emmDistributor process is making steady progress through the
database. System operators should ensure that it is taking the emmDistributor
process no longer than 5 days to cycle through the database.
Important: Call Cisco Services if it appears that your emmDistributor process is
Important: Call Cisco Services if it appears that your emmDistributor process is
taking longer than 5 days to cycle through the database. Cisco Services engineers
may instruct you to change the value of the EMM_DIST_THROTTLE parameter in
the .profile file on the DNCS.
Possible Error Condition
System operators who see the following message when running the emmlst utility
should call Cisco Services immediately:
EMM distributor is not logging at this time.
Important: This message indicates that the emmDistributor process is not running.
Important: This message indicates that the emmDistributor process is not running.
If the emmDistributor process is not running, the system is not updating DHCTs
with EMMs. If this problem is not corrected, DHCTs may lose authorization for
secure services.