Cisco Headend Digital Broadband Delivery System Guia Do Utilizador
4002178 Rev C
Front Panel Display Options
4-3
Display the Time of Day or a Blank Screen
When the Set-Top is Powered Off
Introduction
The Display: Power Off option allows subscribers to choose whether the set-top
displays the time of day or a blank screen on the LED when the set-top is powered
off. If you do not enable this option, you must select what the set-top displays when
powered off.
Recommended Setting
Enable this option to allow subscribers to choose what is displayed on the front
panel of the set-top when powered off.
Allowing Your Subscribers to Choose What the Set-Top Displays When Powered Off
To allow your subscribers to choose whether the set-top displays the time of day or a
blank screen when powered off, complete the following steps.
Note: To force all subscribers to use the same display on the set-top when it is
Note: To force all subscribers to use the same display on the set-top when it is
powered off, see Selecting What the Set-Top Displays When Powered Off, next in
this section.
1.
On the DNCS Administrative Console, select the Server Applications tab.
2.
Click DHCT Config.
Result: The DHCT Configure Prompt window opens.
Result: The DHCT Configure Prompt window opens.
3.
Select Global.
Result: The Set Up Global DHCT Configuration window opens.
Result: The Set Up Global DHCT Configuration window opens.
4.
Select the General Settings tab.
Result: The General Settings tab appears in the forefront.
Result: The General Settings tab appears in the forefront.
5.
Make sure the option for Display: Power Off is selected.
Result: When this field is selected, subscribers can select whether the LED
Result: When this field is selected, subscribers can select whether the LED
displays the time of day or a blank screen when the set-top is powered off.
6.
Click Save.
Result: The General Settings menu of the set-top will now display the
Result: The General Settings menu of the set-top will now display the
options for displaying either the time of day or a blank screen when the set-
top is powered off.
7.
Click Cancel.
Result: The DHCT Configure prompt opens.
Result: The DHCT Configure prompt opens.