Cisco Headend Digital Broadband Delivery System Guia Do Utilizador
4002178 Rev C
Interactive Program Guide Options
6-5
Show the Current Channel Number, Date, and Time on
the Interactive Program Guide
Introduction
The Show Tuned Channel Banner option lets you specify whether the current
channel number, date, and time appear in the upper right corner of the Interactive
Program Guide. The channel banner is displayed right below the live video feed. If
you do not enable this option, the channel banner will not appear on the Interactive
Program Guide.
Recommended Setting
Enable this option to show the “Where am I” banner on the Interactive Program
Guide.
Important: Only use the “Where am I” banner if you have Channel Changing
Important: Only use the “Where am I” banner if you have Channel Changing
Enabled for the Scaled Video. See Allow Subscribers to Change Channels for the
Scaled Video, in chapter 8.
Showing the Channel Banner on the Interactive Program Guide
To show the channel banner on the Interactive Program Guide, complete the
following steps.
1.
On the DNCS Administrative Console, select the Server Applications tab.
2.
Click DHCT Config.
Result: The DHCT Configure Prompt window opens.
Result: The DHCT Configure Prompt window opens.
3.
Select Global.
Result: The Set Up Global DHCT Configuration window opens.
Result: The Set Up Global DHCT Configuration window opens.
4.
Select the IPG tab.
Result: The IPG tab appears in the forefront.
Result: The IPG tab appears in the forefront.
5.
Do you want to show the channel banner on the Interactive Program Guide?
•
•
If yes, be sure the Show Tuned Channel Banner option is selected. The
channel banner will appear in the upper right corner of the Interactive
Program Guide below the live video feed.
•
If no, be sure the Show Tuned Channel Banner option is not selected.
6.
Click Save.
Result: The Interactive Program Guide will respond as you specified in
Result: The Interactive Program Guide will respond as you specified in
step 5.
7.
Click Cancel.
Result: The DHCT Configure prompt opens.
Result: The DHCT Configure prompt opens.
8.
Click File and Close to close the DHCT Configure prompt.