Cisco Headend System Release 2.5 Guia Do Utilizador
Add the SDV Server to the Desired Service Group
4024447 Rev C
25
Add the SDV Server to the Desired Service Group
Overview
A service group is a set of modulator channels (Quadrature Amplitude Modulation
[QAMs], multiple QAMs [MQAMs], or Gigabit QAMs [GQAMs]) that have been
combined to provide services to a unique set of DHCTs. In order to provide SDV
services, you must add a service group for each SDV server in your network.
[QAMs], multiple QAMs [MQAMs], or Gigabit QAMs [GQAMs]) that have been
combined to provide services to a unique set of DHCTs. In order to provide SDV
services, you must add a service group for each SDV server in your network.
To provide SDV services, GQAMs can only be added to a service group. Service
groups enable DHCTs to distinguish which GQAM is providing the SDV service.
groups enable DHCTs to distinguish which GQAM is providing the SDV service.
Important: The GQAMs you plan to add to a service group must first be installed in
your network and configured on the DNCS. If they are not installed and configured,
please do so now. If you need assistance, refer to Gigabit QAM Modulator Model
D9479 Hardware Installation and Operation Guide (part number 745431).
your network and configured on the DNCS. If they are not installed and configured,
please do so now. If you need assistance, refer to Gigabit QAM Modulator Model
D9479 Hardware Installation and Operation Guide (part number 745431).
Adding GQAMs to a Service Group for SDV
The GQAMs you plan to add to a service group must first be installed in your
network and configured on the DNCS. If they are not installed and configured,
please do so now. If you need assistance, refer to Gigabit QAM Modulator Model
D9479 Hardware Installation and Operation Guide (part number 745431).
network and configured on the DNCS. If they are not installed and configured,
please do so now. If you need assistance, refer to Gigabit QAM Modulator Model
D9479 Hardware Installation and Operation Guide (part number 745431).
When configuring the GQAM for SDV services, the GUI on the DNCS should
resemble the following output.
resemble the following output.
Important:
Please ensure that you have accurately defined the application support for RF
outputs planned for SDV service groups. If the carrier is supporting both VOD
and SDV, set the application support to Shared. If the carrier is supporting SDV
only, set the application support to SDV only.
outputs planned for SDV service groups. If the carrier is supporting both VOD
and SDV, set the application support to Shared. If the carrier is supporting SDV
only, set the application support to SDV only.
Please ensure that now RF carriers are muted when they are added to a service
group.
group.