Cisco Headend System Release 2.5 Guia Do Utilizador
Run the sdvProvisionKeys Script
4024447 Rev C
65
Run the sdvProvisionKeys Script
Overview
The sdvProvisionKeys script is a script that allows you to synchronize the SDV
server keys used by the download protocol. The script enables an SDV server to
download new software directly from the DNCS.
server keys used by the download protocol. The script enables an SDV server to
download new software directly from the DNCS.
Important: Run the sdvProvisionKeys script once for each SDV server.
Note: The sdvProvisionKeys script is included in your SDV package.
Running the sdvProvisionKeys Script
Complete the following steps to run the sdvProvisionKeys script for each SDV
server that will require new software.
1 From the xterm window where you are logged in as root user, type the following
server that will require new software.
1 From the xterm window where you are logged in as root user, type the following
command: cd /dvs/dncs/bin
2 Type ./sdvProvisionKeys <IP Address of SDV Server> and press Enter. The
script begins to run.
Note: The script will take a few minutes to complete.
Note: The script will take a few minutes to complete.
3 Did the script successfully run?
If yes, the last few lines at the end of the script will resemble the following
output.
output.
If no, contact Cisco Services.
4 Do you want to run the sdvProvisionKeys script for another SDV server?
If yes, repeat steps 2–3.
If no, go to step 5.
5 Type exit to then press Enter to exit from the root user.
6 Keep the xterm window open and go to Install the SDV Software on the DNCS
6 Keep the xterm window open and go to Install the SDV Software on the DNCS
(on page 66).