Cisco Headend Digital Broadband Delivery System Guia Da Instalação
Restart the System Components
4042389 Rev A
61
Note: If the site you are upgrading does not use the Aptiv or MDN/ODN
application server, skip this procedure and go to Restart the System Components
(on page 59).
application server, skip this procedure and go to Restart the System Components
(on page 59).
Restarting the DNCS
1 From an xterm window on the DNCS, type exit and then press Enter to log out
the root user.
2 Type dncsStart and press Enter. The Informix database, the SOAPServers, and
DNCS processes start.
3 Click the middle mouse button on the DNCS and select Administrative Console.
The DNCS Administrative Console opens.
4 From the DNCS Administrative Console Status window, click DNCS Control.
Results:
The DNCS Control window opens.
Green indicators begin to replace red indicators on the DNCS Control
window.
window.
5 From an xterm window on the DNCS, type dncsControl and then press Enter.
The DNCS Control utility window opens.
6 Type 2 (for Startup / Shutdown Single Element Group) and then press Enter.
The DNCS Control window updates to list the status of all of the processes and
servers running on the DNCS.
servers running on the DNCS.
7 Wait for the DNCS Control window to list the current status (Curr Stt) of all the
processes and servers as running.
Notes:
Notes:
The DNCS Control window updates automatically every few seconds or you
can press Enter to force an update.
can press Enter to force an update.
The indicators on the DNCS Control window all become green when the
processes and servers have restarted.
processes and servers have restarted.
Restarting the RNCS Processes
Complete this procedure only if Distributed DNCS is licensed and you have active
RNCS systems. Complete this procedure for each active RNCS.
1 From a dncs xterm window on the DNCS, type the following command and
RNCS systems. Complete this procedure for each active RNCS.
1 From a dncs xterm window on the DNCS, type the following command and
press Enter.
siteCmd <RNCS hostname> lionnStart
Note: Replace <RNCS hostname> with the hostname of the RNCS.
2 Wait a few moments and then type the following command and press Enter to
verify that all of the RNCS processes have started.
siteCmd <RNCS hostname> pgrep –fl dvs