Cisco Phoenix - HFC Network Monitoring Gateway Ficha De Dados
Data Sheet
Page 1 of 4
Transponder 9105x for Compact Amplifiers and Nodes
For the Compact family of amplifiers and optical nodes, the Compact Transponder offers
extensive monitoring and control capabilities. It is controlled by Cisco
’s ROSA™ Element
Management System (EMS). The transponder is a true plug-in module designed to fit in
the monitorable amplifier or node’s transponder socket. Since the Compact amplifiers
the monitorable amplifier or node’s transponder socket. Since the Compact amplifiers
and nodes have an individual transponder socket, the transponder can be snapped into
place without interrupting service. No special mounting kits or cables are required and all
test points remain fully accessible at all times.
The transponder monitors the operational parameters of the Compact amplifiers and nodes and
allows remote control of many functions. Communications with the transponder is accomplished via
the built-in forward RF data carrier receiver and reverse RF data carrier transmitter.
The unit is used to monitor and/or control a wide range of operational parameters, including:
●
RF level of the forward data carrier (transponder Rx)
●
24 V DC supply
●
AC supply voltage
●
Internal temperature
●
Monitoring the alarm status of the amplifier/node
●
Control of the 3-state reverse switch
●
Control RF level of the reverse data carrier (transponder Tx)
●
Control a variety of parameters depending on product (amplifier or node)
Figure 1. Compact Transponder 9105x