Cisco Cisco FastHub 412M 10 100 Repeater
1
Cisco Systems, Inc.
All rights reserved.
All rights reserved.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
San Jose, CA 95134-1706
USA
Cisco Systems, Inc.
Corporate Headquarters
Copyright © 1998
Text Part Number:
Installation Notes for the FastHub 400
10/100 Series Switched Uplink Modules
10/100 Series Switched Uplink Modules
February 8, 1999
Use the following publications with this document:
•
FastHub 400 10/100 Series Cabling and Start Up
•
FastHub 400 10/100 Series Installation and Configuration Guide
•
FastHub 400 10/100 Series Command Reference
These installation notes describe the functional and physical features of the switched uplink modules
for the FastHub 400 models. This document also provides installation and cabling procedures,
troubleshooting information, and technical specifications.
for the FastHub 400 models. This document also provides installation and cabling procedures,
troubleshooting information, and technical specifications.
Note
See the FastHub 400 10/100 Series Installation and Configuration Guide for information on
managing the modules through the hub manager.
Notes, cautions, and warnings use the following conventions and symbols:
Note
Means reader take note. Notes contain helpful suggestions or references to materials not
contained in this manual.
Caution
This caution symbol means reader be careful. In this situation, you might do something that could
result in equipment damage or loss of data.
Warning
This warning symbol means danger. You are in a situation that could cause bodily injury. Before
you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with
standard practices for preventing accidents. (To see translations of the warnings that appear in this
publication, refer to the FastHub 400 10/100 Series Installation and Configuration Guide.)
standard practices for preventing accidents. (To see translations of the warnings that appear in this
publication, refer to the FastHub 400 10/100 Series Installation and Configuration Guide.)
78-6054-01 Rev. A0