Cisco DNCS System Release 2.8.1 3.8.1 4.3.1 Guia Do Utilizador



If your system uses a Brick mode package, the set-top or CableCARD module must be

authorized for that package as well. This should have been done when the set-top or
CableCARD module was staged.

11.

Click Add. The package name you selected moves into the Selected field.

12.

In the Options area, make the following selections as appropriate:



IPPV Enable - If this set-top or CableCARD module uses IPPV services, enable this option and

ensure that the credit limit field is set to a non- zero value.



DMS Enable - Enable this option to allow the set-top or CableCARD module to receive secure

services.



DIS Enable - Enable this option. It must be enabled to help generate VOD purchases.



Analog Enable - If this set-top needs to display secure analog services, enable this option.

Note: Your system and the set-top must be designed to display secure analog services for this
option to work properly. If necessary, refer to the Analog Descrambling Support for the Digital
Broadband Delivery System Application Guide (part number 716370) for details. To obtain a
copy of this publication, see 



Fast Refresh Enable - This option is used to send EMMs to set-top or CableCARD modules

during staging. For more information, refer to the Explorer Digital Home Communications
Terminal Staging Guide (part number 734375).



Location - Leave these fields blank or enter a 0 (zero) in each field. The X and Y coordinates

are used for Blackout and Spotlight features.

13.

Click Save. The system updates the database with the information you entered for this set-top or

CableCARD module.

14.

Click DHCT Instant Hit. The system displays Instant Hit succeeded and sends the necessary

EMMs to the DHCT or CableCARD module.

15.

Click Close to close the Set Up DHCT window and return to the DHCT Provisioning window.

16.

Click Cancel to close the DHCT Provisioning window and return to the DNCS Administrative Console.

17.

Your next step is to verify that the service was set up successfully by trying to access the service. Go