Cisco DNCS System Release 2.8.1 3.8.1 4.3.1 Guia Do Utilizador
9.
Click the Service B arrow and select the service that you want to appear on this channel when Service
A ends.
10.
Click in the Ends at field to the right of the Service B field and type the exact time you want Service B
to stop appearing on this channel. You must type two digits for each value.
Example: You would type ten o'clock as 100000. The system inputs the colons for you and displays
10:00:00.
10:00:00.
Note: You can also represent time in the 24-hour format. For example, 22:30:00 would represent 10:30
p.m.
p.m.
11.
Click AM/PM to establish which portion of the day that Service B will stop appearing on this channel.
This also establishes when Service A will start appearing on this channel.
Note: The default time for Service A to start using a channel slot is midnight. However, when you select
the ending time for Service B, you can reset this time to be any time you want. The actual time that
Service A will begin using the channel slot is reflected in the bottom left corner of the Set Up Split
Channel window after you select AM or PM.
the ending time for Service B, you can reset this time to be any time you want. The actual time that
Service A will begin using the channel slot is reflected in the bottom left corner of the Set Up Split
Channel window after you select AM or PM.
12.
Click OK. The system saves the split channel information in the DNCS database and closes the Set Up
Split Channel window. The Set Up Display Channel Map window updates to include the new split
channel.
channel.
13.
Do you need to split another channel on this channel map?
If yes, repeat this procedure from step 5.
If no, click Save. The system saves the channel map information in the DNCS database, closes
the Set Up Display Channel Map window, and returns you to the Display Channel Map List
window.
window.
Note: It takes approximately 10 minutes for channel changes to take effect and appear on DHCTs.
14.
Do you need to split another channel on another channel map?
If yes, repeat this procedure from step 3.
If no, click File > Close to close the Display Channel Map List window and return to the DNCS
Administrative Console.
15.
Do you need to include the service on your IPG?
If yes, refer to the SARA Application Server 3.4.1 User's Guide (part number 4012159) for
.
If no, go to step 17.
16.
Your next step is to test the new service on a DHCT to verify that it has been set up successfully. Go
Page 596