Cisco DNCS System Release 2.7 3.7 4.2 Guia Do Desenho
About This Guide
vi
78-4001708-01 Rev B
Verify the host ID number
Verify the ECM and EMM counts
Determine if there has been a decryption failure, and if so, when it occurred
Determine the customer service number you need to start service
Verify the current copy protection authorization
Audience
This guide is written for cable system operators, service providers, and Cisco
personnel who have experience with accessing the SARA-based diagnostic screens
for Explorer DHCTs.
Related Publications
You may find the following publications useful as resources when you implement
the procedures in this document. Check the copyright date on your resources to
assure that you have the most current version. The publish dates for the following
documents are valid as of this printing. However, some of these documents may
have since been revised:
Best Practices for Using Multi-Stream CableCARD Modules (part number 4005658,
expected publish date: mid-year 2007)
Explorer
®
Digital Home Communications Terminal Staging Guide (part number
734375, published August 2006)
Explorer
®
Digital Home Communications Terminal Troubleshooting Guide (part
number 717867, published June 2002)
Setting Up the PowerKEY
®
CableCARD™ and M-Card™ Modules on the DNCS for
System Releases 2.5/3.5 and 4.0 (part number 4011765, published November 2006)
Setting Up PowerKEY
®
CableCARD™ and M-Card™ Modules on the DNCS for
System Releases 2.7/3.7 and 4.2 (part number 4014667, published July 2007)
Document Version
This is the second release of this document.