Cisco DNCS System Release 2.7 3.7 4.2 Guia Da Instalação
Chapter 2 Phase One - Perform Pre-Upgrade Checks
22
78-4003052-01 Rev G
Run listOSM Utility
The listOSM utility determines which DHCT models are currently using the OSM
download method and reports the unused files in the OS list.
Running listOSM Utility
1 Are you using the OSM download method for any DHCTs in your network?
If yes or if you are unsure, go to step 2.
If no, go to Run listCVT Utility (on page 24).
2 Open an xterm window on the DNCS.
3 Type listOSM -v and press Enter. This command provides you the version of
3 Type listOSM -v and press Enter. This command provides you the version of
listOSM utility that is currently on your network.
4 Compare the version number of the listOSM utility on your DNCS with the
version number listed in the ROM to Model Matrix (on page 107).
If the version number is equal to or greater than the one listed in the matrix,
go to step 5.
If the version number is less than the one listed in the matrix, contact Cisco
Services to receive the latest utility.
5 Type cd /export/home/dncs/doctor and press Enter. The current directory is now
the doctor directory.
Note: Type a space between cd and /.
Note: Type a space between cd and /.
6 Type listOSM > preosm and press Enter.
7 Type more preosm and press Enter. This command lets you view the file and
7 Type more preosm and press Enter. This command lets you view the file and
verify the current download configuration for each DHCT type is active in the
network.
8 Does the report indicate that there are unused files?
If yes, go to step 9.
If no, go to step 13.
9 On the DNCS Administrative Console, select the DNCS tab and then select the
following tab based on the system release you have installed:
For SR 2.2/3.2/4.0 and earlier, select the Element Provisioning tab.
For SR 2.5/3.5/4.2 and later, select the Home Element Provisioning tab.
10 Click OS. The DHCT OS List window opens.
11 Highlight a DHCT software file that is unused in the network, click File, and
11 Highlight a DHCT software file that is unused in the network, click File, and
then select Delete.
Important! Do not delete files with different naming formats such as .rle, .res, or
Important! Do not delete files with different naming formats such as .rle, .res, or
.dat. These files are used by other functions such as logos and configuration files.
Note: The DHCT software files typically have file extensions of .ver, _0, and _1.
Note: The DHCT software files typically have file extensions of .ver, _0, and _1.