Cisco DNCS System Release 2.7 3.7 4.2 Guia Da Instalação
Download to the CVT Test Groups
78-4003052-01 Rev G
61
19 Type doctor -q and press Enter.
20 Are all of the QAMs still active in the network?
20 Are all of the QAMs still active in the network?
If yes, go to step 21.
If no, reboot any non-responding QAM. If a QAM continues to be
unresponsive, then contact Cisco Services.
21 Your next step is to verify that the test device or devices downloaded software
and operate as expected. Go back to step 4 of Phase Two CVT Checklist (on page
52) for more information. Then, go to Phase Three - Install New Software (on
page 63).