Cisco DNCS System Release 2.7 3.7 4.2 Referências técnicas

Página de 16
 
4011319 Rev C 
 
Configure Unencrypted Transport Streams 
 
5  Click File, and then select New. The Set Up Source window opens. 
 
6  Click in the Source Name field and type the name you will use to identify this 
source. You can use up to 20 alphanumeric characters. 
Note: We recommend that you use a naming scheme that indicates the source 
type (analog or digital), the channel number the service will use, and the service 
name. For example, a source name of D02 WeatherScan indicates that this is a 
digital source (D) providing content on channel 2 (02) for the WeatherScan 
service. 
7  Click in the Source ID field and type the number you will use to identify this 
source. Typically, the source ID is 1000 plus the number of the channel offering 
the service. For example, the source ID for a service appearing on channel 2 
would be 1002. You can use up to 5 numeric characters. 
Notes: 
 
You must use a number that is greater than 200 for the source ID. Source ID 
numbers 1 through 200 are reserved for system-built service sources. 
 
Remember the source ID. You will need it as you continue to set up the 
service. 
8  Click Save
Results: 
 
The system saves the source information in the DNCS database and closes 
the Set Up Source window. 
 
The Source List window updates to include the new source. 
9  In the Source List window, click on the row containing the source you just 
created.