Cisco Cisco RF Gateway 1

 

 

Cisco RF Gateway 1 Software 
Release 5.01.15 Release Note 

 

RF Gateway 1 (RFGW-1) software Release 5.01.15 addresses a specific Auto 
Session Refresh failure condition. This condition occurs when PMT PIDs carry 
input program numbers different from those that are set up in the sessions. 

The purpose of this document is to notify RFGW-1 users of the enhancements 
included in the current release, and to inform users of any special upgrade 
procedures needed for using RFGW-1 software Release 5.01.15. 

This document is intended for system engineers or managers responsible for 
operating and/or maintaining this product. 

Refer to the following documents for additional information regarding hardware 
and software: 

 

Cisco RF Gateway 1 Configuration Guide, part number 78-4025112-01 

 

Cisco RF Gateway 1 System Guide, part number 78-4024958-01 

If this document discusses software, the software described is used to monitor 
and/or control ours and other vendors' electrical and optical equipment designed 
to transmit video, voice, or data signals. Certain safety precautions should be 
observed when operating equipment of this nature. 
For equipment specific safety requirements, refer to the appropriate section of the 
equipment documentation.