Cisco Cisco StadiumVision Director Manual De Manutenção
© 2011 Cisco Systems, Inc. All rights reserved.
Page 20 of 83
Chapter 2 Planning
This chapter provides information about how to plan for local TV control in a Cisco
StadiumVision venue.
StadiumVision venue.
Selecting the Appropriate Control Device
The device chosen for local TV control depends largely on the number of TVs to be
controlled.
controlled.
Table 2.
Selecting the Appropriate Local TV Control Device
Quantity of TVs
Example of Location
Recommended Device
1
Press box, back office
IR remote or Cisco Unified IP Phone 7975
1-9
Luxury Suite
Cisco Unified IP Phone 7975
>9
Bar, club, restaurant
Third-party touch panel
Note: Although the IP Phone can support up to 29 TVs, the initial TV selection panel
can list up to 9 TVs. Therefore, the recommendation is to use the IP Phone in luxury
suites with 9 or less TVs.
can list up to 9 TVs. Therefore, the recommendation is to use the IP Phone in luxury
suites with 9 or less TVs.
7B
IR Remote
When using an IR remote for local TV control, keep the following in mind:
Can control only a single TV.
Requires line-of-sight access to the
DMP‟s Infra Red (IR) receiver.
Requires Cisco StadiumVision Alternate Device Services license.
8B
Cisco IP Phone
When using a Cisco IP Phone for local TV control, keep the following in mind:
Recommended option for luxury suites. However, if the venue uses a non-Cisco
VoIP solution in the luxury suites, use a third-party touch panel for local control.
Can control up to 29 TVs, but recommendation is to limit to 9. Greater than 9
TVs will require the user to navigate through multiple pages to locate the desired
TV.
TV.
If the phone is used in a suite with more than 9 TVs consider splitting the suite
into 2 or more control areas, using a separate phone for each area.
Only the Cisco Unified IP Phone 7975 can be used as a local TV control device.
Requires Cisco Unified Communications Manager (CUCM).
Requires Cisco StadiumVision Video Management Services license.