Cisco Cisco StadiumVision Director Manual De Manutenção
© 2011 Cisco Systems, Inc. All rights reserved. This document is Cisco Internal Information.
Page 9 of 28
4. Type the desired tag name, for example, the name of the advertising
agency. The tag name must use the following naming convention in order
to be picked up by proof of play:
to be picked up by proof of play:
<tag name>_PoP
Note: Do not use following invalid characters such as / ? < > \ : * | " in the tag
name.
name.
Note: The "_PoP" after the tag name is not included in the proof of play
report; only the <tag name> is displayed in the report.
report; only the <tag name> is displayed in the report.
5. From the Playlist items window, click and drag the content you want to
assign onto the tag you just created in the Content Navigation window.
You can assign multiple playlists to the same tag.
You can assign multiple playlists to the same tag.
The number of playlists assigned to each tag displays under the # column
in the Content Navigation window next to the tag name. To find out which
playlists are assigned to a tag, double-click on the tag name.
in the Content Navigation window next to the tag name. To find out which
playlists are assigned to a tag, double-click on the tag name.
Figure 6.
Assigning Playlist Content to a PoP Tag
Enabling Proof of Play for an Event Script
To limit the amount of data gathered by SV Director, proof of play is enabled
by default for each playlist, but not for event scripts. To generate proof of play
data, you must enable it at both levels.
by default for each playlist, but not for event scripts. To generate proof of play
data, you must enable it at both levels.
1. Open the Control Panel and select the Control tab.
2. Select an event script.
3. Enable the Proof of Play Yes button for the event script.
4. Click Run Script.